LapTracker-Mini incorporates two independent stopwatches. Up to 50 lap-times (per stopwatch) may be recorded, and stored. Car numbers may be quickly entered for each time, or series of times. For ease-of-use, the stopwatch buttons are arranged so that they may be manipulated by touch, using your fingers - allowing you to keep your eyes on the action while timing. Fastest or Slowest time searches are one button-press away - and all data can be simply uploaded to LapTracker v/32 (running on Windows 95/98) for additional analysis, printing, and storage. LapTracker-Mini allows you to connect your 3Com modem/serial cable to a serial communications port on your computer to easily upload timing data to LapTracker v/32 running under Windows 95/98. Once uploaded, your data is available to all of LapTracker v/32's integrated functions, e.g. lap-stats. Printing, analysis, and graphing, etc.

The package comes complete with the new LapTracker software. Some of the systems major features are:

• Time and score two vehicles simultaneously, using a single photo-cell (staggered-start method).
  
• 1/100th-second resolution of stopwatches.
  
• Time and score up to 2000 runs (1000 runs x 2 stopwatches) in a single session.
  
• Store all competitor (e.g. club member) information in the Master Database. Includes: Vehicle Number, Driver Name, Vehicle Type, Vehicle Class, Remarks.
  
• Use the Master Database information to automatically 'feed' vehicle identification to stopwatches prior to each competitor's run (virtually eliminates data-entry chore, during your event).
  
• Flexible, comprehensive, easy-to-use report capability built-in (Excel or similar spread-sheet program not required). Generate starting-grids, finish-grids, best 'n' fastest times reports...
  
• Programmable 'Minor' and 'Major' penalty seconds - assign penalties to competitors in real-time, or post-run. Log Did Not Start (DNS) and Did Not Finish (DNF) events with the click of a button.
  
• Auto-Save feature ensures you that you will never lose a significant amount of timing/scoring data. (Data-save interval is programmable from 1 to 60 minutes). Save to hard-disk, Zip drive, floppy, etc. Auto-Saves are performed in the 'background', automatically, so that you can simultaneously continue to use all other program features while the 'save' takes place.
  
• Full context-sensitive help for all functions (if you should ever need it).
  

The setup of the LapTracker-Autocross Kit is easy and explained in step-by-step instructions. The system comes with everything you need to start auto-timing your events, including the following:

• Registered version of LapTracker v/32.
  
• Industrial-Strength Photo-Cell (retroreflective), including high-efficiency reflector.
  
• 25 feet of inter-connect cabling (from photo-cell to computer). (Longer cable lengths available by special order).
  
• Power cable (15 feet) - Coaxial connector on interface module-end to cigarette-lighter plug on power-end. (Other power-end connectors and longer power cable lengths available by special order).
  
• Interface module - Accepts 12 VDC (via coaxial power jack) and provides cable-out to computer (DB-9 female connector).
  
• DB-9 to DB-25 serial port adapter.
  
• Detailed User's Manual (including schematics).
  
• 90-Day Parts / Labor warranty (does not cover breakage).
  

To Begin Auto-Timing Your Laps:

• Install LapTracker on your computer (Setup program provided).
  
• Position photo-cell and reflector, and align them to one another.
  
• Plug interface module into a 'free' serial port on your computer.
  
• Plug 12 VDC into interface module. (2 volt-amperes power).
  
• Configure LapTracker to your specific timing/scoring requirements.
  
• Start timing your event.
  

Note: Complete step-by-step instructions covering all phases of setup/operation included.